This is the simplest way to test a torque wrench with no special tools just: a. Torque wrench (Tekton 2432 1/4") b. Bolt to anchor it (used a bolt on the bike frame) c. 2 empty gallon jugs (or some other known weight) d. hook to attach weight (here I used a coat hanger and an S hook.) If you want to test if ur inch pound wrench works use the following simple formula Torque = Length * Weight inch-#s inches pounds (If you're testing a FOOT-pound wrench, just measure the length in FEET) In this test this wrench with 2 gal water jugs: torque 166= 9.5" * 17.5# Torque / Weight = Length inch-#s pounds inches Rule of thumb 1 US Gallon of water = ~ 8.35 lb. T
None of the audio/visual content is hosted on this site. All media is embedded from other sites such as GoogleVideo, YouTube etc. Therefore, this site has no control over the copyright issues of the streaming media.
All issues concerning copyright violations should be aimed at the sites hosting the material. This site does not host any of the streaming media and the owner has not uploaded any of the material to the video hosting servers. Anyone can find the same content on Google Video or YouTube by themselves.
The owner of this site cannot know which documentaries are in public domain, which has been uploaded to e.g. YouTube by the owner and which has been uploaded without permission. The copyright owner must contact the source if he wants his material off the Internet completely.