This is an animation of the device built by Convergent Scientific. CSI is a Washington state startup working on polywells/fusor technology. This was an early prototype. The device is a straight copper wire, bent into this diamond shape. Up to 1,500 amps flows through the wire (as of Fall 2013). The direction of the current was assumed and is shown in red. At that current, the wire can overheat - so a fluorinert coolant layer accompanies the wire. CSI reported that the coolant layer was inside the copper wire, and had a lackluster performance. This layer is not shown. The moving current makes a magnetic field shown in blue. This field is different from WB6. CSI built this device on the idea that the magnetic mirror effect was independent of field direction. This video is not affiliated with CSI.
None of the audio/visual content is hosted on this site. All media is embedded from other sites such as GoogleVideo, YouTube etc. Therefore, this site has no control over the copyright issues of the streaming media.
All issues concerning copyright violations should be aimed at the sites hosting the material. This site does not host any of the streaming media and the owner has not uploaded any of the material to the video hosting servers. Anyone can find the same content on Google Video or YouTube by themselves.
The owner of this site cannot know which documentaries are in public domain, which has been uploaded to e.g. YouTube by the owner and which has been uploaded without permission. The copyright owner must contact the source if he wants his material off the Internet completely.