This is to show a nasty problem in my Anita MK12 machine. In https://youtu.be/PDrMX56Yq9I you can see how it should work. Entering just one number results in quite random numbers at random places in the registers. After entering a number, the machine should stop the oscillator and wait for the moment when you release the button. Instead of that the machine keeps running until the display is filled up with randomness... The problem comes trough the buffer card which keeps down the 'stopway' signal. I've omitted this card to track down the error. (sorry for the annoying beep, that is my failing Nokia 1020 camera)
Monroe 1651 Nixie Tube Engineering Calculator From 1971 Part 2 -- Power on & Functionality
None of the audio/visual content is hosted on this site. All media is embedded from other sites such as GoogleVideo, YouTube etc. Therefore, this site has no control over the copyright issues of the streaming media.
All issues concerning copyright violations should be aimed at the sites hosting the material. This site does not host any of the streaming media and the owner has not uploaded any of the material to the video hosting servers. Anyone can find the same content on Google Video or YouTube by themselves.
The owner of this site cannot know which documentaries are in public domain, which has been uploaded to e.g. YouTube by the owner and which has been uploaded without permission. The copyright owner must contact the source if he wants his material off the Internet completely.